Products

Buy the process that hurts. Add the rest when it pays.

Six products, one plant-edge runtime, one audit backbone, one data flywheel. Turbix is the perception every control product acts on, Coagen, Aerix and Membraq are the control pillars for dosing, aeration energy and membranes, Simflo rehearses every plan before write-back, and Permia gates all of it to stay permit-safe.

Six productsOne runtime$12,000 per process per month

run_scn_0418 · agent graph · scenario 10 nodes · 1 approval gate
01 · intake_screen Read influent and forecast ✓ SUCCEEDED 02 · orchestrator Rehearse the next 24 hours ✓ SUCCEEDED 03 · quality_anomaly Fuse cameras and analyzers ✓ SUCCEEDED 04 · dose_coagulate Compute the dose curve ✓ SUCCEEDED 05 · dose_coagulate Trim the coagulant setpoint ✓ SUCCEEDED 06 · aerate_bio Minimum-energy DO schedule ✓ SUCCEEDED 07 · orchestrator Blower move approved ◆ APPROVAL 08 · membrane_disinfect Flux hold and backwash timing ✓ SUCCEEDED 09 · compliance_energy Permit conformance check ✓ SUCCEEDED 10 · conformance Write the shift record ✓ SUCCEEDED

Illustrative scenario: one municipal activated-sludge wastewater plant with a membrane train, planning the next 24 hours after a rain forecast. Not a measured run.

The ecosystem

Six products, one loop

These are the stages of one perceive, dose, aerate, filter, disinfect and comply loop plus the twin that plans it, not separate bets. They share the plant-edge runtime, the sensors and cameras, the compliance governance, the control connectors and one compounding flywheel.

Dosing pillar

Coagen

Autonomous coagulation, flocculation and chemical dosing that hits target water quality at minimum chemical cost.

agent.dose_coagulate

Aeration and energy pillar

Aerix

Autonomous aeration and biological-process control that cuts the plant's biggest energy bill while holding effluent spec.

agent.aerate_bio

Membrane, desalination and reuse pillar

Membraq

Membrane and RO fouling prognostics with autonomous flux, backwash and cleaning control for desalination and water reuse.

agent.membrane_disinfect

Perception substrate

Turbix

Plant-edge water-quality perception: vision plus online-sensor fusion that sees turbidity, clarity, foam and anomalies in real time.

agent.quality_anomaly

Simulation spine

Simflo

The as-run plant digital twin: simulate dosing, membranes and aeration to hit water quality, compliance and energy before the shift.

agent.orchestrator

Governance spine

Permia

Autonomous compliance and permit assurance: predict excursions, prove every action and keep the plant permit-safe.

agent.compliance_energy
Dosing pillar · agent.dose_coagulate

Coagen

Autonomous coagulation, flocculation and chemical dosing that hits target water quality at minimum chemical cost.

The problem

Coagulant, polymer and chemical dosing is the most craft-bound and cost-sensitive step in a treatment plant. Operators set doses from jar tests and experience, then chase a drifting, weather-driven influent with fixed setpoints and periodic lab samples. Overdosing wastes expensive chemicals and drives sludge and residual-metal problems; underdosing breaks turbidity, TOC and filter-loading limits and risks disinfection-byproduct and permit excursions.

What Coagen does

Coagen closes the loop from influent perception to dosing-pump action. It forecasts influent characteristics, predicts the coagulation, flocculation and settled and filtered water response, and continuously computes the coagulant, polymer and pH-adjust dose under turbidity, TOC, alkalinity, sludge, byproduct and cost constraints. It runs in shadow, assist or bounded closed-loop mode, learning from every operator correction and lab confirmation.

Key features

  • Influent forecasting from online analyzers, weather and upstream telemetry
  • Predictive dose-response models with settled and filtered water outcome prediction
  • Continuous multi-objective dose optimization: quality, chemical cost, sludge, byproducts
  • Shadow, assist and bounded closed-loop autonomy, compliance-gated
  • Virtual jar-test recommendations and dose ramp planning for wet-weather surges
  • Immutable dosing decision and lab-confirmation audit trail

AI capabilities

Coagen AI capabilities and status
CapabilityStatus
Influent and dose-response forecastingReal, fine-tunable per plant
Multi-objective constrained dose optimizationReal, via cuOpt
Physics-informed priors: mass balance, alkalinity, residence timePlanned
Dose-change justification and operator Q&A over SOPs and permitsReal, via the model router
Learning from the closed-loop correction corpusPlanned

NVIDIA stack

Jetson Orin at the plant edge runs TensorRT dose-response and influent models for on-prem control when cloud links degrade. DGX or HGX trains per-cohort dose-response transformers. TensorRT and Triton serve inference with per-tenant routing and audit ids; NeMo fine-tunes the justification models; cuOpt solves the dose schedule; RAPIDS builds features from analyzer, lab and SCADA tags. NVIDIA AI Enterprise and NIM for supported self-hosted serving. Items beyond Jetson, TensorRT, Triton and cuOpt are planned.

For
Drinking-water plants, municipal and industrial wastewater plants, desalination pretreatment and water-reuse facilities where dosing is a major cost and compliance lever
Price
Process tier, $12,000 per dosing process per month; outcome pricing on measured chemical savings for enterprise deals
First release
Shadow-mode influent forecasting, dose-response model and recommendation console on one drinking-water or industrial plant; one online turbidity or TOC analyzer and one dosing controller; recommendation logged against operator action and lab result
In the loop
Settled and filtered water predictions feed Turbix and Simflo; dose plans are optimized against Aerix energy, rehearsed on Simflo and permit-checked by Permia
Aeration and energy pillar · agent.aerate_bio

Aerix

Autonomous aeration and biological-process control that cuts the plant's biggest energy bill while holding effluent spec.

The problem

Aeration is the single largest energy consumer at most wastewater plants, often the majority of plant electricity, because blowers are run conservatively high to guarantee nutrient removal and avoid permit excursions. Dissolved-oxygen, activated-sludge and nutrient-removal dynamics are nonlinear, load- and temperature-variable and craft-controlled; fixed DO setpoints waste energy in low-load periods and still risk nitrification upsets, bulking and nutrient breaches during surges.

What Aerix does

Aerix models DO demand and the activated-sludge and nutrient-removal state, forecasts influent load, and continuously computes the minimum-energy blower and DO setpoint schedule that still meets nitrogen, phosphorus and effluent targets. It coordinates aeration with dosing for external carbon and chemical phosphorus removal, predicts biological upsets before they breach permit, and runs shadow, assist and bounded closed-loop against blower and DO controls.

Key features

  • Influent-load forecasting and DO-demand prediction per basin
  • Biological-state estimation: nitrification, denitrification, sludge age, bulking risk
  • Minimum-energy blower and DO setpoint optimization under nutrient and permit constraints
  • Aeration and dosing coordination for nutrient removal and external carbon
  • Biological-upset and nutrient-excursion early warning
  • Energy, kWh per cubic meter and permit audit trail

AI capabilities

Aerix AI capabilities and status
CapabilityStatus
Load and DO-demand time-series forecastingReal, fine-tunable
Biological-state estimation and upset predictionReal; physics-informed priors planned
Constrained energy minimization of blower schedulesReal, via cuOpt
Twin-in-the-loop aeration simulation for pre-shift planningPlanned, via Simflo
Control justification over SOPs and permitsReal

NVIDIA stack

Jetson Orin runs TensorRT DO and biological models per basin for low-latency, resilient on-prem control. DGX or HGX trains the biological and aeration transformers and runs the oxygen-transfer simulation. cuOpt solves blower and DO scheduling under nutrient, permit and tariff constraints; TensorRT and Triton serve forecasting and state estimation; Omniverse and Modulus carry the aeration twin; NeMo and RAPIDS handle process-reasoning tuning and telemetry ETL. NVIDIA AI Enterprise and NIM for on-prem serving. Twin, NeMo, RAPIDS and NIM are planned.

For
Municipal and industrial wastewater plants running activated sludge, nutrient removal or MBR, water-reuse facilities and utilities with energy and decarbonization mandates and nutrient or discharge permits
Price
Process tier, $12,000 per aeration process per month; outcome pricing on measured kWh and nutrient-compliance improvement for enterprise fleets
First release
Shadow-mode DO-demand forecasting and energy-optimization recommendation on one activated-sludge plant; blower and DO SCADA tags and one online ammonia or nitrate analyzer; kWh per cubic meter and nutrient compliance baselined
In the loop
Coordinates with Coagen on external carbon and chemical phosphorus; shares influent forecasts with Turbix and Simflo; optimized against energy tariffs; validated pre-shift by Simflo; permit-checked by Permia
Membrane, desalination and reuse pillar · agent.membrane_disinfect

Membraq

Membrane and RO fouling prognostics with autonomous flux, backwash and cleaning control for desalination and water reuse.

The problem

Membranes and reverse osmosis are the backbone of desalination and potable and non-potable reuse, but they are dominated by fouling and scaling: transmembrane pressure and flux drift with feed water, temperature and biofouling, so operators run conservative flux, over-clean and waste chemicals, water and membrane life, or under-clean and risk irreversible fouling and integrity breaches. Cleaning timing, backwash frequency and flux setpoints are craft decisions made with lagging indicators.

What Membraq does

Membraq fuses feed-water quality, transmembrane pressure, flux, differential pressure and conductivity to predict fouling and scaling trajectories, forecasts the flux and recovery that maximize membrane life, and schedules backwash and clean-in-place just in time to minimize energy, chemical and water use, while guarding integrity and pathogen log-removal for reuse. It runs shadow, assist and bounded closed-loop against membrane skid controls and learns from every cleaning outcome.

Key features

  • Fouling and scaling prognostics from TMP, flux, conductivity and feed-quality fusion
  • Flux and recovery recommendation under energy and integrity constraints
  • Just-in-time backwash and clean-in-place scheduling to extend membrane life
  • Integrity and pathogen log-removal monitoring for reuse compliance
  • Membrane-life and energy, chemical and water forecasting and benchmarking
  • Immutable cleaning and integrity audit trail

AI capabilities

Membraq AI capabilities and status
CapabilityStatus
TMP, flux and fouling time-series prognosticsReal, fine-tunable per train
Physics-informed membrane models: TMP and flux, mass transfer, osmotic pressurePlanned
Constrained optimization of flux, recovery and cleaning schedulesReal, via cuOpt
Anomaly and integrity-breach detection from sensor fusionReal
Justification over membrane SOPs, warranties and permitsReal

NVIDIA stack

Jetson Orin runs TensorRT fouling and integrity models per skid for resilient on-prem control. DGX or HGX trains the fouling-prognostics transformers across the fleet and runs membrane simulation. TensorRT and Triton serve prognostics and anomaly models with audit routing; cuOpt schedules backwash, cleaning and flux under energy, recovery and integrity constraints; Omniverse and Modulus simulate fouling and flux for the twin; RAPIDS and NeMo handle telemetry ETL and reasoning. NVIDIA AI Enterprise and NIM for self-hosted serving. Twin, RAPIDS, NeMo and NIM are planned.

For
Seawater and brackish desalination plants, potable and non-potable water-reuse facilities, MBR wastewater plants and industrial high-purity water operators
Price
Process tier, $12,000 per membrane process per month; outcome pricing on membrane-life extension and energy and chemical savings for large desalination and reuse fleets
First release
Shadow-mode fouling prognostics and flux and cleaning recommendation on one RO or MBR train; TMP, flux and conductivity tags and cleaning logs; run length, cleaning frequency and energy baselined
In the loop
Hands treated-water quality to disinfection and Turbix; shares energy optimization with Aerix and the fleet; validated pre-shift by Simflo; integrity and log-removal outcomes permit-checked by Permia
Perception substrate · agent.quality_anomaly

Turbix

Plant-edge water-quality perception: vision plus online-sensor fusion that sees turbidity, clarity, foam and anomalies in real time.

The problem

Treatment plants run largely blind between lab samples. Turbidity, clarity, floc and settling behaviour, foam and bulking, filter breakthrough, membrane leaks, chlorine residual, pH, nutrients and TOC are judged by periodic grab samples, delayed lab results and operator rounds. Online analyzers exist but are siloed, noisy and drift-prone, and they are not fused with the visual cues experienced operators read by eye.

What Turbix does

Turbix fuses plant-edge computer vision on clarifier, basin and filter cameras with online analyzers into a continuous, calibrated, drift-corrected water-quality state, predicting excursions and detecting anomalies before lab confirmation. It provides the real-time perception and soft-sensor signals that Coagen, Aerix, Membraq and the compliance agent act on, and flags integrity and safety anomalies plant-wide.

Key features

  • Edge vision for clarity and turbidity, foam and bulking, floc and settling, colour and surface anomalies
  • Multimodal fusion of vision and online analyzers into a calibrated water-quality state
  • Soft sensors and analyzer drift and fault detection with calibration cues
  • Excursion and anomaly early warning with severity and location
  • Vision-based safety and asset anomaly detection: leaks, overflows, intrusion
  • Immutable perception and evidence-image audit trail

AI capabilities

Turbix AI capabilities and status
CapabilityStatus
Clarity, foam, floc and anomaly vision at the plant edgeReal, fine-tunable
Multimodal sensor and image fusion into calibrated soft sensorsReal
Time-series anomaly detection and excursion forecastingReal
Synthetic augmentation of rare visual and sensor eventsPlanned, via Replicator and Cosmos
Analyzer drift and fault estimationReal; physics-informed priors planned

NVIDIA stack

Jetson Orin runs TensorRT vision and fusion models at each camera and analyzer cluster, with design targets under 100 ms per camera and 15 to 30 frames per second. DGX or HGX trains the vision and fusion models on plant imagery, corrections and lab results. Metropolis and DeepStream carry the multi-camera pipelines; Holoscan fuses analyzer streams at low latency; Cosmos and Omniverse Replicator synthesize rare foam, fouling, breakthrough and surge scenarios; Triton, NeMo and RAPIDS serve, reason and build features. NVIDIA AI Enterprise and NIM for self-hosted edge deployment. Synthetic data, NeMo, RAPIDS and NIM are planned.

For
Drinking-water, wastewater, desalination and reuse plants at utilities and industrial operators that need continuous, calibrated water-quality sensing beyond periodic labs
Price
Process tier, $12,000 per quality-sensing area per month; attaches to every process product
First release
Edge vision on one clarifier or filter camera fused with one turbidity or chlorine analyzer, calibrated against lab results; excursion and anomaly alerts to operators
In the loop
Calibrated state and soft sensors feed Coagen, Aerix and Membraq; anomalies trigger Robot-and-Inspect sampling; evidence images and excursions feed Permia and the Simflo twin
Simulation spine · agent.orchestrator

Simflo

The as-run plant digital twin: simulate dosing, membranes and aeration to hit water quality, compliance and energy before the shift.

The problem

Operators make high-stakes control decisions, dose ramps, blower setpoints, cleaning windows and wet-weather response, with no way to test them before committing to the live plant. Design models are static as-designed simulations that diverge from the real, aged, fouled, drifting plant. Rare, dangerous scenarios are exactly where operators have the least data and the most risk, and they cannot be rehearsed on a live public-health asset.

What Simflo does

Simflo builds a live, calibrated GPU simulation of each plant, hydraulics, coagulation and clarification, filtration, membrane fouling, aeration and oxygen transfer, and biological and nutrient response, that tracks the real plant as run rather than as designed. Before each shift it simulates the next 8 to 24 hours and evaluates 50 to 500 candidate control plans, returning the plan that hits target water quality, compliance and energy, and generates synthetic rare-event scenarios to stress-test autonomy and train the other agents.

Key features

  • As-run, continuously calibrated plant twin: hydraulic, process and biological
  • Pre-shift 8 to 24 hour simulation and multi-plan control evaluation, 50 to 500 candidates
  • Synthetic rare-event generation: wet-weather surge, fouling, biological upset, sensor drift
  • What-if sandbox for operators and closed-loop plan validation before write-back
  • As-run versus as-designed divergence, commissioning and scenario reporting
  • Twin state feeds and validates Coagen, Aerix and Membraq control plans

AI capabilities

Simflo AI capabilities and status
CapabilityStatus
GPU physics simulation: hydraulics, oxygen transfer, membrane flux, biological kineticsPlanned fidelity per process
Data assimilation and calibration of the twin to live telemetryReal
Surrogate and neural-operator models for fast twin evaluationReal; Modulus planned
Synthetic scenario generationPlanned, via Cosmos and Replicator
Control-plan search over simulated outcomesReal, via cuOpt

NVIDIA stack

DGX or HGX and OVX run the process, hydraulic and biological simulation and many parallel plan evaluations; RTX workstations carry twin authoring and visualization for engineering firms; Jetson Orin runs distilled surrogate twins at the plant for on-shift what-ifs. Omniverse is the twin environment, Modulus the physics surrogates, Cosmos and Replicator the synthetic scenarios, cuOpt, CUDA and RAPIDS the plan search, solvers and calibration ETL. NVIDIA AI Enterprise and Omniverse Cloud for hosting. Full fidelity, edge surrogates and scenario coverage are planned.

For
Utilities and industrial water operators running drinking-water, wastewater, desalination and reuse plants, and the design and engineering firms that model and commission them
Price
Bundled in the Plant tier; standalone twin add-on for enterprise fleets and engineering firms; outcome pricing on de-risked commissioning and energy and compliance gains
First release
A calibrated surrogate twin for one process train, aeration or clarification, that assimilates live telemetry and runs pre-shift what-ifs against lab-verified outcomes; Modulus surrogates before full simulation
In the loop
Validates Coagen, Aerix and Membraq plans before write-back; supplies synthetic training data to Turbix and every control agent; quantifies compliance and energy for Permia; de-risks Robot-and-Inspect missions
Governance spine · agent.compliance_energy

Permia

Autonomous compliance and permit assurance: predict excursions, prove every action and keep the plant permit-safe.

The problem

Water and wastewater plants live or die by permits: drinking-water standards, discharge permits, nutrient limits, PFAS and disinfection-byproduct rules and reporting obligations across many jurisdictions. Compliance is assembled by hand from SCADA logs, lab results and operator notes, and a single excursion can breach a permit, trigger fines and endanger public health. Operators react after lab confirmation; there is no continuous, predictive, auditable compliance layer.

What Permia does

Permia continuously evaluates plant state against every applicable permit and regulation, forecasts excursion risk hours ahead, and gates autonomy so that control actions from Coagen, Aerix and Membraq stay permit-safe. It uses permission-aware retrieval over permits, SOPs and water regulations with enforced citations, maintains an immutable, assurance-grade audit trail of every agent and operator action, and drafts regulatory reports with full traceability.

Key features

  • Continuous permit and regulation conformance evaluation across all parameters
  • Excursion-risk forecasting with hours-ahead early warning and root-cause hints
  • Compliance-gated autonomy: bounded, permit-checked write-back approval for control agents
  • Permission-aware regulatory retrieval with enforced citations
  • Immutable, assurance-grade audit trail of every action, approval and override
  • Drafted regulatory reports and genealogy with source citations

AI capabilities

Permia AI capabilities and status
CapabilityStatus
Excursion-risk forecasting and anomaly detectionReal
Permission-aware retrieval with citation grounding over permits and regulationsReal
Conformance, non-conformance and report draftingReal, via the router; NeMo-tuned planned
Guardrails, schema validation and compliance gating of control actionsReal
Golden-set and model-as-judge evaluation gating model and prompt changesReal

NVIDIA stack

DGX or HGX trains the excursion-forecasting models and fine-tunes the compliance-reasoning models; Jetson Orin runs excursion-risk inference and action gating on-prem when cloud links degrade. NeMo with Guardrails governs the compliance models with citation enforcement; TensorRT and Triton serve forecasting and retrieval with per-tenant routing and audit ids; RAPIDS builds compliance features from SCADA, lab and permit data. NVIDIA AI Enterprise and NIM for on-prem retrieval and LLM serving. NeMo, RAPIDS and NIM are planned.

For
Utilities and industrial water operators subject to drinking-water, discharge, nutrient, PFAS and reuse regulations; compliance and regulatory-affairs teams; multi-site fleets standardizing auditable compliance
Price
Bundled governance in the Plant tier; premium compliance and multi-jurisdiction models in Enterprise; outcome pricing on avoided excursions and audit readiness
First release
Continuous conformance evaluation and a drafted compliance report with cited traceability for one plant against its permit set; excursion-risk forecasting from SCADA and lab data; then compliance gating of one control agent's bounded write-back
In the loop
Gates Coagen, Aerix and Membraq write-back; consumes Turbix perception and Simflo simulations for excursion risk; records Robot-and-Inspect evidence; turns every action into cited, permit-safe traceability
Run timeline

The products in one run

Every Hydrira run is an ordered, inspectable sequence. This is run_scn_0418, an illustrative scenario: one municipal activated-sludge wastewater plant with a membrane train, planning the next 24 hours after a rain forecast. Ten steps, nine automatic, one human approval on the blower setpoint move, every action written to the shift record.

run_scn_0418 scenario · not measured SUCCEEDED
  1. 01 Read influent and forecast SUCCEEDED 1.2 s

    Intake-and-Screen · Flow, turbidity, ammonia and alkalinity at the headworks, and a 24-hour rain forecast that raises the expected influent by mid-afternoon.

  2. 02 Rehearse the next 24 hours SUCCEEDED 4 min 10 s

    Plant orchestrator · Simflo evaluates candidate dose, DO and flux plans over the 24-hour horizon and keeps the plans that hold permit margin through the surge.

  3. 03 Fuse cameras and analyzers SUCCEEDED 180 ms

    Quality-and-Anomaly · Clarifier blanket, foam and colour from the basin cameras fused with turbidity, pH, nutrient and residual analyzers into one calibrated plant state.

  4. 04 Compute the dose curve SUCCEEDED 2.4 s

    Dose-and-Coagulate · Coagulant and polymer dose ramp for the surge window under turbidity, phosphorus, sludge and chemical-cost constraints, cited to the plant's dosing SOP.

  5. 05 Trim the coagulant setpoint SUCCEEDED 0.6 s

    Dose-and-Coagulate · A bounded setpoint move inside the declared rate and magnitude limits for the dosing pump, with the rollback value recorded first.

  6. 06 Minimum-energy DO schedule SUCCEEDED 3.1 s

    Aerate-and-Bio · Blower and DO setpoint schedule across the basins that meets the nitrogen and phosphorus targets at the lowest kilowatt-hours the biological state allows.

  7. 07 Blower move approved APPROVAL 6 min 02 s

    Plant orchestrator · The DO setpoint change is above the plant's threshold for this loop. The process engineer on shift reviews the predicted nutrient margin and approves.

  8. 08 Flux hold and backwash timing SUCCEEDED 1.8 s

    Membrane-and-Disinfect · Flux held through the surge and the next backwash moved earlier, inside the integrity envelope; the disinfection residual minimum is untouched.

  9. 09 Permit conformance check SUCCEEDED 0.9 s

    Compliance-and-Energy · Every planned setpoint checked against the discharge permit, the nutrient limits and the residual minimum, with excursion risk forecast for the horizon.

  10. 10 Write the shift record SUCCEEDED 0.3 s

    Quality-and-Conformance · Inputs, model versions, predictions, limits, the approval and every write appended to the immutable shift record the plant owns.

Compare

What is in each plan

Products are licensed per process on the Process tier and bundled on Plant and Enterprise.

What is in each plan
CapabilityProcessPlantEnterprise
Processes covered1All on siteAll in fleet
Control agentsOne of Coagen, Aerix, MembraqAllAll, with custom models
Turbix perceptionAs the one process, or attachedIncludedIncluded
Simflo twinNot includedIncludedIncluded, per-archetype templates
Permia compliance gatingIncluded for the processPlant-wide, with reportingMulti-jurisdiction
Robot-and-InspectNot includedWhere policy allowsWhere policy allows
Autonomy stagesShadow, assist, boundedShadow, assist, boundedShadow, assist, bounded, fleet policy
DeploymentPlant edge + cloudPlant edge + cloud or on-premEdge fleet, on-prem or private cloud
SupportDesign-partner supportDesign-partner supportSLAs
Outcome pricingNot includedOptionalAvailable
Tool calls

One log, every product

Every tool invocation, argument and result is written to an immutable, human-readable log, and every reasoning step is expandable. Nothing about a run is hidden from the plant. The log below is the scenario run, not a measured one.

tool-call stream · run_scn_0418
  1. 05:40:02scada.read_influent({ plant: "WWTP-A", tags: ["FLOW", "NTU", "NH4", "ALK"] })
  2. 05:40:03ok flow 412 L/s · turbidity 118 NTU · ammonia 31 mg/L · alkalinity 184 mg/L
  3. 05:40:03weather.read_forecast({ horizon_h: 24 })
  4. 05:40:04ok rain from 14:00 · expected influent +38% by 17:00
  5. 05:40:04twin.simulate({ horizon_h: 24, candidates: 240, objective: ["permit_margin", "kwh", "chemical"] })
  6. 05:44:14ok 240 plans evaluated · 31 hold permit margin through the surge · best plan selected
  7. 05:44:15vision.fuse_state({ cameras: ["CLAR-1", "CLAR-2", "AER-3"], analyzers: "all" })
  8. 05:44:15ok blanket 1.1 m · foam none · effluent turbidity 1.8 NTU · residual 0.9 mg/L
  9. 05:44:16cuopt.solve_dose({ window_h: 12, constraints: ["NTU", "P", "sludge", "cost"] })
  10. 05:44:18ok coagulant ramp 38 → 46 mg/L from 13:30 · polymer unchanged · cite sop:DOSE-07 §3
  11. 05:44:19policy.evaluate({ loop: "dose", stage: "bounded", tag: "DOS1.SP" })
  12. 05:44:19ok permitted · max_step 4 mg/L per 15 min · rollback 38 mg/L
  13. 05:44:19plc.write_setpoint({ tag: "DOS1.SP", value: 42, unit: "mg/L" })
  14. 05:44:20ok written · ack from PLC · audit id 0418-05
  15. 05:44:20cuopt.solve_blowers({ basins: 4, constraints: ["NH4", "NO3", "P", "DO_min"] })
  16. 05:44:23ok DO 2.0 → 1.6 mg/L basins 1–3 from 06:00 · predicted −9% kWh · nutrient margin held
  17. 05:44:24policy.evaluate({ loop: "aeration", stage: "assist", tag: "BLW.DO_SP" })
  18. 05:44:24above threshold for this loop · routed to approve.human · engineer on shift notified
  19. 05:50:26approved by the process engineer on shift · reason: nutrient margin 0.6 mg/L above limit
  20. 05:50:27membrane.schedule_backwash({ train: "MBR-2", surge_at: "14:00" })
  21. 05:50:29ok flux held 24 LMH · backwash moved 16:00 → 13:15 · residual minimum untouched
  22. 05:50:29permit.evaluate({ permit: "NPDES-WWTP-A", horizon_h: 24 })
  23. 05:50:30ok all parameters inside limit · excursion risk 24 h: low · cite permit §II.A
  24. 05:50:30audit.commit({ run: "run_scn_0418", steps: 10, approvals: 1 })
  25. 05:50:30ok shift record written · immutable · exportable

Reasoning trace

Goal, plan, thought, action, observation, exactly as the orchestrator would record it.

GoalHold effluent turbidity, nutrients and disinfection residual i…

Hold effluent turbidity, nutrients and disinfection residual inside the discharge permit for the next 24 hours while taking aeration energy and coagulant use to the minimum the permit margin allows.

PlanRead influent and the forecast; rehearse the horizon on Simflo…

Read influent and the forecast; rehearse the horizon on Simflo; fuse the plant state; compute dose and DO schedules; write the dose inside bounds; route the DO move for approval; hold flux and move the backwash; check the permit; commit the record.

ThoughtRain arrives mid-afternoon and the influent will rise by about…

Rain arrives mid-afternoon and the influent will rise by about a third. Dosing has to ramp before the surge, not after, and the DO schedule has to keep nutrient margin through it.

Actioncuopt.solve_dose over a 12-hour window under turbidity, phosph…

cuopt.solve_dose over a 12-hour window under turbidity, phosphorus, sludge and cost constraints; plc.write_setpoint on the coagulant pump inside the declared rate and magnitude limits.

ObservationThe dose ramp holds predicted effluent turbidity under 2 NTU t…

The dose ramp holds predicted effluent turbidity under 2 NTU through the surge. The DO schedule saves energy but is above the threshold set for the aeration loop.

ThoughtEnergy never outranks permit margin. The DO change goes to the…

Energy never outranks permit margin. The DO change goes to the engineer with the predicted nutrient margin attached, and nothing is written until it is approved.

Actionapprove.request to the process engineer on shift; membrane.sch…

approve.request to the process engineer on shift; membrane.schedule_backwash to hold flux and move the next backwash ahead of the surge; permit.evaluate across the horizon.

OutcomeTen steps, one human approval, all parameters inside limit on …

Ten steps, one human approval, all parameters inside limit on the forecast, and the shift record written. Illustrative scenario; nothing here is a measured plant result.

Autonomy

Four stages, set per loop

A plant does not go from manual to bounded control in one step. Hydrira makes the stage explicit per loop, auditable and reversible at any time, and some decisions never leave the person.

Autonomy stages and the human role at each
StageWhat the agent doesWhat the person doesWhen
ShadowPredicts water quality, fouling, excursion risk and energy; writes nothingRuns the plant as today; compares predictions to lab, analyzer and SCADA outcomesFirst phase with every design partner
AssistRecommends dose, DO, flux and cleaning moves with predicted quality, energy and permit impactApproves, corrects or rejects each move; corrections train the modelsAfter accuracy is proven against the plant's own baseline
BoundedWrites to an allow-list of low-risk loops inside declared rate and magnitude limitsSets the limits, watches the record, pulls the loop back at any timePer loop, after the assist-mode gate and compliance sign-off
ExceptionsEscalates anything above the threshold, every permit-adjacent move and every releaseDecides; the operator of record is never removed from compliance decisionsAlways
Accelerated computing

Physical AI, at the plant edge

A treatment plant runs around the clock on variable influent, and many utilities keep plant data on site, so perception and control inference run at the plant edge. Hydrira keeps training, simulation and optimization in the cloud, in a private cloud or on-prem. Items marked planned are on the roadmap, not running.

Jetson Orin / Thor · TensorRT · DeepStream · Holoscan

Plant-edge inference

TensorRT-optimized time-series and vision models at the plant edge; DeepStream pipelines for clarifier, basin and filter cameras; Holoscan fusing camera streams with turbidity, pH, chlorine and nutrient analyzers at 1 to 10 Hz. Jetson Thor is planned.

Triton · NIM · NVIDIA AI Enterprise

Model serving

Water-quality forecasting, anomaly detection, control recommendation and compliance retrieval served with per-tenant routing, model versioning and an audit id on every call. Self-hosted for utility on-prem and edge deployment. Planned.

DGX / HGX · NeMo

Training and fine-tuning

Time-series transformers, vision models and NeMo-tuned process and compliance reasoning trained on plant telemetry, operator corrections, images, alarms, lab results, permits and SOPs. Design target: weekly fine-tuning per design-partner cohort, then monthly fleet refreshes. Planned.

Omniverse · OVX · Modulus

The as-run twin

Simflo runs plant hydraulics, clarifier and filtration behaviour, membrane fouling, oxygen transfer and biological response as a GPU simulation calibrated to the live plant, with Modulus surrogates for fast evaluation. Planned.

Cosmos · Omniverse Replicator

Synthetic rare events

Wet-weather surges, sensor drift, foaming, fouling, filtration breakthrough and biological upsets generated as scenario variants to stress-test autonomy and train the perception and control agents. Planned.

cuOpt

Optimization

Blower and pump scheduling, chemical dosing windows, membrane cleaning, backwash timing and fleet maintenance routes solved under energy tariff, labour, asset and permit constraints.

RAPIDS

GPU analytics

ETL over high-volume SCADA tags, lab results, membrane data, alarms and image metadata to build features and golden evaluation sets. Planned.

Isaac · Jetson

Robotics

Supervised robotic sampling routes, asset-inspection rovers and materials handling across intake, treatment and disinfection, where plant policy allows robots. Planned.

Design targets

Product design targets

The numbers Hydrira is engineered against, from the GPU utilization plan.

<100 ms per camera inference at the plant edge, on Jetson Orin
15–30 FPS foam, clarity and anomaly vision per camera
1–10 Hz sensor fusion across SCADA tags and online analyzers
8–24 h simulated on the as-run twin before each shift starts
50–500 candidate control plans compared per twin run
10k–100k synthetic surge, fouling and upset scenario variants per plant archetype

Design targets from the GPU utilization plan, all marked aspirational in the architecture. Nothing on this page is a measured plant result.

From the plant floor

Who this is built for

The three people in a treatment plant whose week changes when the process runs itself, and what each of them needs from Hydrira.

Economic buyer

Plant or Operations Manager

Owns compliance, reliability, energy, chemicals and cost. Wants autonomous, compliant, lower-energy, lower-chemical treatment, and a number that justifies the spend.

Champion

Process or Water Engineer

Owns dosing, aeration, membrane and biological strategy, the process windows and the performance. Needs recommendations they can inspect, correct and trust before any loop is handed over.

Approver

Compliance, Sustainability and Energy Lead

Owns permit compliance, water quality, energy and environmental reporting and the licence to operate. Needs every action cited, logged and defensible in front of a regulator.

IT/OT and critical-infrastructure cybersecurity leads approve the deployment. There are no customer quotes on this site yet; design partners will be the first voices.

Integrations

It speaks plant, not cloud

Hydrira reads and writes through the systems already in the plant. No parallel historian, no new HMI, no rip-and-replace. Connectors are built against each design partner's stack first; long-tail integrations are out of scope for the first release.

SCADA and historians

Plant SCADA, historians, PLC and DCS interfaces

Tag reads at 1 to 10 Hz, guarded setpoint writes, interlocks untouched

Dosing and chemical skids

Coagulant, polymer, pH-adjust and disinfectant dosing controllers

Dose reads, bounded setpoint writes inside declared limits

Aeration and blowers

Blower controls, DO and ammonia-based aeration control

DO and blower reads, bounded setpoint writes after approval

Membrane skids

Membrane and RO skid PLCs, TMP, flux, conductivity, integrity monitors

Reads; flux and backwash writes inside the integrity envelope

Online analyzers

Turbidity, pH, chlorine residual, nutrient, TOC and flow analyzers

Reads; drift and fault flags

Lab and LIMS

Lab information systems, jar-test and grab-sample records

Reads for labels and calibration

Cameras and robots

Fixed cameras on clarifiers, basins, filters and membrane rooms; inspection robots

Streams fused at the edge; supervised routes

Utility MES, CMMS, permits

Utility MES, maintenance systems, permit and reporting systems, weather

Reads; shift record and report drafts written back

See all integrations

Guardrails

An agent that can move a setpoint needs a leash

Hydrira writes to control equipment in a plant that keeps a community's water safe. Every capability is scoped, every write is policy-checked, every output is cited, and every action is written to an append-only audit log the plant owns.

  • Bounded action space. Each agent can only write to an explicit tag allow-list, inside per-tag rate and magnitude limits, at the autonomy stage the plant has set.
  • Permit limits are read, never written. Permit-limit setpoints, disinfection residual minimums, integrity limits and discharge release decisions stay with the permit and the operator of record.
  • Policy engine before every write. Autonomy stage, interlock state, permit margin, excursion forecast and operator presence are evaluated before a setpoint moves.
  • Grounded and cited. Every recommendation carries a citation to the permit, SOP or regulation it relied on. Retrieval is tenant-isolated and permission-aware.
  • Immutable audit log. Append-only, exportable and retained on the plant's own storage, aligned to Safe Drinking Water Act, discharge-permit and EU Water Framework record-keeping.
  • Hard fallback. If the edge node, the network or a model stops, the plant keeps running on its existing SCADA, PLC and DCS control and interlocks.
  • Tenant isolation and critical-infrastructure posture. Telemetry, permits, SOPs and models never cross a customer boundary. On-prem and edge-only deployment available for utilities.

Assurance posture

Assurance and certification status
ItemScopeStatus
SOC 2 Type I + critical-infrastructure cyber reviewCloud control plane, edge QUEUED Roadmap, first 6 months
SOC 2 Type IICloud control plane QUEUED Roadmap, 6 to 12 months
SDWA · discharge permits · EU WFD · nutrient and PFAS rulesGrounding and record-keeping RUNNING Design basis for retrieval and the audit log
Per-tenant isolationData, memory, models RUNNING Design rule
On-prem or edge-only deploymentUtilities, critical infrastructure RUNNING Design option

Hydrira supports your compliance records. It is not a certification, it does not replace your permit and it never removes the operator of record from a compliance decision.

Read the security overview

Enterprise

Standardize autonomy across the fleet

One policy model, one audit trail and one set of energy, chemical, compliance and water-quality benchmarks across every plant in the fleet, with each site's permits, SOPs and process models kept private to that site.

Talk to us Enterprise details

  • Multi-site plant-edge fleet with shared model governance
  • Custom process, compliance and energy models per site
  • SSO and role-based access, named approvers (roadmap, 6 to 12 months)
  • Model versioning, validation reports and rollback
  • On-prem or private-cloud deployment
  • SLAs and outcome-based components on the highest-value workflows
FAQ

Straight answers

The questions operations managers, process engineers and compliance leads ask in the first meeting.

Only at the autonomy stage your plant has set, and only to an explicit allow-list of low-risk loops inside documented limits. Every design partner starts in shadow mode, where Hydrira predicts and writes nothing. Assist mode follows, where a process engineer approves each move. Bounded write-back comes last, per loop, after the accuracy gate and compliance sign-off, and can be pulled back at any time.

Get started

Pick your first product

Most plants start with Aerix on an activated-sludge basin group or Coagen on a dosing train. Tell us which number you need to move.