agent.intake_screen
Intake-and-Screen
Intake, screening, equalization, flow buffering
Reads influent flow, weather and upstream telemetry and holds intake, screening and equalization against variable, weather- and load-driven flows, so the rest of the train sees a buffered feed instead of a surge.
scada.read_influentweather.read_forecastplc.write_setpoint(equalization)
Design scope: surge buffered, screens unblinded, flow handed on
Ships in: Plant tier
agent.dose_coagulate
Dose-and-Coagulate
Coagulant, polymer and pH-adjust dosing, coagulation, flocculation
Forecasts influent turbidity, alkalinity, temperature and TOC, predicts the settled and filtered water response, and computes the coagulant, polymer and pH-adjust dose under turbidity, TOC, sludge, byproduct and cost constraints. Writes to dosing controllers only at the stage the plant has set.
analyzer.read_influentcuopt.solve_doseplc.write_setpoint(dose)
Design scope: target clarity at minimum chemical cost
Ships in: Coagen
agent.settle_filter
Settle-and-Filter
Sedimentation, clarification, filtration, backwash, breakthrough
Watches clarifier blanket, filter head loss and filtered turbidity, predicts breakthrough, and schedules backwash so filters run to their real capacity instead of a timer.
scada.read_filtersvision.read_blanketplc.write_setpoint(backwash)
Design scope: breakthrough predicted, backwash just in time
Ships in: Plant tier
agent.membrane_disinfect
Membrane-and-Disinfect
Membrane and RO flux, fouling, cleaning; disinfection residual and byproducts
Fuses feed quality, transmembrane pressure, flux, differential pressure and conductivity to predict fouling and scaling, recommends flux and recovery, and schedules backwash and clean-in-place just in time. Disinfection residual is held to its minimum and never written below it.
membrane.read_tmp_fluxmembrane.schedule_backwashplc.write_setpoint(flux)
Design scope: longer runs, fewer cleans, integrity guarded
Ships in: Membraq
agent.aerate_bio
Aerate-and-Bio
Aeration, dissolved oxygen, activated sludge, nutrient removal
Models dissolved-oxygen demand and the activated-sludge and nutrient-removal state, forecasts influent load, and computes the minimum-energy blower and DO setpoint schedule that still meets nitrogen, phosphorus and effluent targets. Coordinates with dosing on external carbon and chemical phosphorus removal.
analyzer.read_nutrientscuopt.solve_blowersplc.write_setpoint(do)
Design scope: the largest energy load, held at minimum
Ships in: Aerix
agent.sludge_dewater
Sludge-and-Dewater
Sludge wasting, digestion, dewatering, polymer
Holds sludge age, wasting and dewatering polymer dose against the biological state the aeration agent reports, so cake solids and digester load stay inside their windows.
scada.read_sludgeplc.write_setpoint(wasting)
Design scope: sludge age held, cake solids inside window
Ships in: Plant tier
agent.quality_anomaly
Quality-and-Anomaly
Turbidity, pH, chlorine, nutrients, TOC, vision, anomalies
Fuses plant-edge cameras on clarifiers, basins and filters with online analyzers into a calibrated, drift-corrected water-quality state, predicts excursions before lab confirmation, and flags foam, floc, colour, leaks and overflows plant-wide.
vision.fuse_stateanalyzer.read_allanomaly.flag
Design scope: excursion seen before the lab result
Ships in: Turbix
agent.compliance_energy
Compliance-and-Energy
Permit conformance, excursion risk, energy, chemicals, cost
Evaluates plant state against every applicable permit and regulation, forecasts excursion risk hours ahead, arbitrates energy and chemical trade-offs between the control agents, and gates any write that would thin a permit margin.
permit.evaluateexcursion.forecasttariff.read
Design scope: permit margin first, energy second
Ships in: Permia
agent.robot_inspect
Robot-and-Inspect
Robotic sampling, asset inspection, materials handling
Drives supervised sampling routes, asset imaging and confined-area inspection where plant policy allows robots, and hands the evidence to the quality and compliance agents.
robot.plan_routerobot.capturecmms.read_assets
Design scope: supervised routes only, where policy allows
Ships in: Plant tier
agent.conformance
Quality-and-Conformance
Right-first-time, non-conformance, regulatory traceability, reporting
Assembles the shift record, checks it against the permit set and the SOPs, drafts the regulatory report with citations, and raises a non-conformance when a reading, action or approval is missing.
audit.commitreport.draftnonconformance.open
Design scope: every action traceable to a source
Ships in: Permia
agent.water_knowledge
Water-Knowledge
Permits, SOPs, water regulations, operator Q&A
Answers process, compliance and permit questions with retrieval over permits, SOPs and water regulations, every answer cited to its source. It has no write tools of any kind.
rag.retrieve(permits)rag.retrieve(sops)
Read only: no write tools, by design
Ships in: Plant tier
agent.orchestrator · coordinates all eleven
Plant orchestrator
Shift plan, arbitration, twin rehearsal, approval routing
Plans the shift, rehearses it on the Simflo twin, arbitrates when two agents want one actuator, applies the autonomy policy per loop and routes anything above the threshold to a named person.
twin.simulateapprove.requestpolicy.evaluate
Coordinates all eleven; never writes to the plant itself
Ships in: Every tier