Pricing

Priced per process. Justified per cubic meter and per kilowatt-hour.

A Process subscription is justified from verified savings or avoided risk on one process: aeration energy, coagulant and polymer cost, membrane run length and cleaning count, or excursions avoided. We would rather you started with one process and one number than with a plant-wide program nobody can baseline.

From $12,000 / process / mo15–20% annual prepay discountOutcome components available

run_scn_0418 · agent graph · scenario 10 nodes · 1 approval gate
01 · intake_screen Read influent and forecast ✓ SUCCEEDED 02 · orchestrator Rehearse the next 24 hours ✓ SUCCEEDED 03 · quality_anomaly Fuse cameras and analyzers ✓ SUCCEEDED 04 · dose_coagulate Compute the dose curve ✓ SUCCEEDED 05 · dose_coagulate Trim the coagulant setpoint ✓ SUCCEEDED 06 · aerate_bio Minimum-energy DO schedule ✓ SUCCEEDED 07 · orchestrator Blower move approved ◆ APPROVAL 08 · membrane_disinfect Flux hold and backwash timing ✓ SUCCEEDED 09 · compliance_energy Permit conformance check ✓ SUCCEEDED 10 · conformance Write the shift record ✓ SUCCEEDED

Illustrative scenario: one municipal activated-sludge wastewater plant with a membrane train, planning the next 24 hours after a rain forecast. Not a measured run.

Pricing

Priced per process, per plant, per fleet

Land on one process with a measured baseline. Expand by process, plant, fleet site and autonomy stage. Outcome components available on energy, chemicals, compliance and reliability.

Process $12,000 per treatment process or area / month

Dosing, aeration or membrane control, or quality-sensing AI, for one process. For utilities and operators validating ROI on the wedge.

  • One process: Coagen, Aerix, Membraq or Turbix
  • Plant-edge runtime and connectors for that process
  • Shadow, assist and bounded stages for its loops
  • Review console and immutable audit log
  • Permit-gated writes through Permia
Start with one process
Enterprise Custom land $600k to $9M ACV

Multi-site utility or industrial fleet, custom process, compliance and energy models, a plant-edge fleet and SLAs. For operators standardizing on Hydrira.

  • Plant-edge fleet with shared model governance
  • Custom process, compliance and energy models per site
  • Multi-jurisdiction permit knowledge
  • SSO, RBAC and named approvers (roadmap)
  • On-prem or private cloud
  • SLAs and outcome-based components
Talk to us

Annual prepay

A 15 to 20% discount for annual prepayment.

Usage

Per-cubic-meter, per-process or per-action metering above plan limits.

Outcome components

A share of measured energy, chemical, compliance or reliability improvement on the highest-value workflows, for enterprise deals.

Multi-year

Enterprise and utility agreements with usage ramps tied to flow and sites. Floor pricing is protected; discounts are traded for term and public-sector references.

Compare

What is in each plan

Products are licensed per process on the Process tier and bundled on Plant and Enterprise.

What is in each plan
CapabilityProcessPlantEnterprise
Processes covered1All on siteAll in fleet
Control agentsOne of Coagen, Aerix, MembraqAllAll, with custom models
Turbix perceptionAs the one process, or attachedIncludedIncluded
Simflo twinNot includedIncludedIncluded, per-archetype templates
Permia compliance gatingIncluded for the processPlant-wide, with reportingMulti-jurisdiction
Robot-and-InspectNot includedWhere policy allowsWhere policy allows
Autonomy stagesShadow, assist, boundedShadow, assist, boundedShadow, assist, bounded, fleet policy
DeploymentPlant edge + cloudPlant edge + cloud or on-premEdge fleet, on-prem or private cloud
SupportDesign-partner supportDesign-partner supportSLAs
Outcome pricingNot includedOptionalAvailable
Run timeline

What you are actually buying

Every Hydrira run is an ordered, inspectable sequence. This is run_scn_0418, an illustrative scenario: one municipal activated-sludge wastewater plant with a membrane train, planning the next 24 hours after a rain forecast. Ten steps, nine automatic, one human approval on the blower setpoint move, every action written to the shift record.

run_scn_0418 scenario · not measured SUCCEEDED
  1. 01 Read influent and forecast SUCCEEDED 1.2 s

    Intake-and-Screen · Flow, turbidity, ammonia and alkalinity at the headworks, and a 24-hour rain forecast that raises the expected influent by mid-afternoon.

  2. 02 Rehearse the next 24 hours SUCCEEDED 4 min 10 s

    Plant orchestrator · Simflo evaluates candidate dose, DO and flux plans over the 24-hour horizon and keeps the plans that hold permit margin through the surge.

  3. 03 Fuse cameras and analyzers SUCCEEDED 180 ms

    Quality-and-Anomaly · Clarifier blanket, foam and colour from the basin cameras fused with turbidity, pH, nutrient and residual analyzers into one calibrated plant state.

  4. 04 Compute the dose curve SUCCEEDED 2.4 s

    Dose-and-Coagulate · Coagulant and polymer dose ramp for the surge window under turbidity, phosphorus, sludge and chemical-cost constraints, cited to the plant's dosing SOP.

  5. 05 Trim the coagulant setpoint SUCCEEDED 0.6 s

    Dose-and-Coagulate · A bounded setpoint move inside the declared rate and magnitude limits for the dosing pump, with the rollback value recorded first.

  6. 06 Minimum-energy DO schedule SUCCEEDED 3.1 s

    Aerate-and-Bio · Blower and DO setpoint schedule across the basins that meets the nitrogen and phosphorus targets at the lowest kilowatt-hours the biological state allows.

  7. 07 Blower move approved APPROVAL 6 min 02 s

    Plant orchestrator · The DO setpoint change is above the plant's threshold for this loop. The process engineer on shift reviews the predicted nutrient margin and approves.

  8. 08 Flux hold and backwash timing SUCCEEDED 1.8 s

    Membrane-and-Disinfect · Flux held through the surge and the next backwash moved earlier, inside the integrity envelope; the disinfection residual minimum is untouched.

  9. 09 Permit conformance check SUCCEEDED 0.9 s

    Compliance-and-Energy · Every planned setpoint checked against the discharge permit, the nutrient limits and the residual minimum, with excursion risk forecast for the horizon.

  10. 10 Write the shift record SUCCEEDED 0.3 s

    Quality-and-Conformance · Inputs, model versions, predictions, limits, the approval and every write appended to the immutable shift record the plant owns.

Packaging

Land, expand, price the value

Land

One process, clear ROI

Low-friction entry on a single dosing, aeration, membrane or sensing process with a hard energy, chemical or compliance metric, or a paid pilot tied to it.

Expand

Processes, plants, fleet sites, autonomy

Adjacent agents in the same plant, then the Plant tier with the Simflo twin, then multi-site utility agreements with plant-edge fleet management and custom models.

Price the value

Usage and outcome components

Per-cubic-meter, per-process or per-action metering above plan limits, and a share of measured energy, chemical, compliance or reliability improvement on the highest-value workflows.

Floor pricing is protected; discounts are traded for term length and public-sector references. Expansion across the fleet is the primary growth engine.

ROI

The arithmetic plants actually run

The pilot KPI is chosen so the plant can baseline it from its own meters, lab, analyzers and permit records before anything is connected.

Wedge processes and the number that justifies them
WedgeProductNumber baselinedSource of the number
AerationAerixkWh per cubic meter; nutrient margin; upsetsBlower meters, nutrient analyzers, operator log
DosingCoagenChemical cost per cubic meter; settled and filtered turbidity; sludge volumeChemical invoices, lab and analyzer records
MembranesMembraqRun length between cleans; cleaning count; specific energy; integrity eventsCleaning log, TMP record, energy meter, integrity monitor
SensingTurbixLead time to alert; excursion count; analyzer drift eventsLab record, excursion log
CompliancePermiaExcursions; report preparation hours; non-conformancesPermit history, reporting records
Use cases

Which plan fits

Hydrira is recruiting two to four design partners for the first cohort. These are the plant types the products were designed around and where each would start.

Municipal drinking water QUEUED

Municipal drinking water

Coagulation, clarification, filtration and disinfection to the drinking-water standard. Starting wedge: Coagen on one dosing train or Turbix on one clarifier.

Municipal wastewater QUEUED

Municipal wastewater

Activated sludge and nutrient removal under a discharge permit, where aeration is the largest energy load. Starting wedge: Aerix on one basin group.

Industrial water and wastewater QUEUED

Industrial water and wastewater

Food, chemicals, semiconductors and power, with process-specific influent and strict discharge limits. Starting wedge: Coagen or Aerix, by the larger invoice.

Desalination QUEUED

Desalination

Seawater and brackish RO dominated by fouling, scaling and specific energy. Starting wedge: Membraq on one train.

Water reuse QUEUED

Water reuse

Potable and non-potable reuse where integrity and pathogen log-removal gate everything. Starting wedge: Membraq with Permia from day one.

MBR plants QUEUED

MBR plants

Membrane bioreactors, where aeration energy and membrane fouling interact. Starting wedge: Aerix and Membraq on one train, rehearsed on Simflo.

Guardrails

An agent that can move a setpoint needs a leash

Hydrira writes to control equipment in a plant that keeps a community's water safe. Every capability is scoped, every write is policy-checked, every output is cited, and every action is written to an append-only audit log the plant owns.

  • Bounded action space. Each agent can only write to an explicit tag allow-list, inside per-tag rate and magnitude limits, at the autonomy stage the plant has set.
  • Permit limits are read, never written. Permit-limit setpoints, disinfection residual minimums, integrity limits and discharge release decisions stay with the permit and the operator of record.
  • Policy engine before every write. Autonomy stage, interlock state, permit margin, excursion forecast and operator presence are evaluated before a setpoint moves.
  • Grounded and cited. Every recommendation carries a citation to the permit, SOP or regulation it relied on. Retrieval is tenant-isolated and permission-aware.
  • Immutable audit log. Append-only, exportable and retained on the plant's own storage, aligned to Safe Drinking Water Act, discharge-permit and EU Water Framework record-keeping.
  • Hard fallback. If the edge node, the network or a model stops, the plant keeps running on its existing SCADA, PLC and DCS control and interlocks.
  • Tenant isolation and critical-infrastructure posture. Telemetry, permits, SOPs and models never cross a customer boundary. On-prem and edge-only deployment available for utilities.

Assurance posture

Assurance and certification status
ItemScopeStatus
SOC 2 Type I + critical-infrastructure cyber reviewCloud control plane, edge QUEUED Roadmap, first 6 months
SOC 2 Type IICloud control plane QUEUED Roadmap, 6 to 12 months
SDWA · discharge permits · EU WFD · nutrient and PFAS rulesGrounding and record-keeping RUNNING Design basis for retrieval and the audit log
Per-tenant isolationData, memory, models RUNNING Design rule
On-prem or edge-only deploymentUtilities, critical infrastructure RUNNING Design option

Hydrira supports your compliance records. It is not a certification, it does not replace your permit and it never removes the operator of record from a compliance decision.

Read the security overview

From the plant floor

Who this is built for

The three people in a treatment plant whose week changes when the process runs itself, and what each of them needs from Hydrira.

Economic buyer

Plant or Operations Manager

Owns compliance, reliability, energy, chemicals and cost. Wants autonomous, compliant, lower-energy, lower-chemical treatment, and a number that justifies the spend.

Champion

Process or Water Engineer

Owns dosing, aeration, membrane and biological strategy, the process windows and the performance. Needs recommendations they can inspect, correct and trust before any loop is handed over.

Approver

Compliance, Sustainability and Energy Lead

Owns permit compliance, water quality, energy and environmental reporting and the licence to operate. Needs every action cited, logged and defensible in front of a regulator.

IT/OT and critical-infrastructure cybersecurity leads approve the deployment. There are no customer quotes on this site yet; design partners will be the first voices.

Enterprise

Standardize autonomy across the fleet

One policy model, one audit trail and one set of energy, chemical, compliance and water-quality benchmarks across every plant in the fleet, with each site's permits, SOPs and process models kept private to that site.

Talk to us Enterprise details

  • Multi-site plant-edge fleet with shared model governance
  • Custom process, compliance and energy models per site
  • SSO and role-based access, named approvers (roadmap, 6 to 12 months)
  • Model versioning, validation reports and rollback
  • On-prem or private-cloud deployment
  • SLAs and outcome-based components on the highest-value workflows
FAQ

Straight answers

The questions operations managers, process engineers and compliance leads ask in the first meeting.

Only at the autonomy stage your plant has set, and only to an explicit allow-list of low-risk loops inside documented limits. Every design partner starts in shadow mode, where Hydrira predicts and writes nothing. Assist mode follows, where a process engineer approves each move. Bounded write-back comes last, per loop, after the accuracy gate and compliance sign-off, and can be pulled back at any time.

Get started

Start with one process

Tell us the process and the number. We will tell you whether a pilot can baseline it.